Aquascaping, Show your Skills... - Page 53

Stylo328 · 02/09/2018, 12:46 PM

Quote:

Originally Posted by Ryan20A

Attachment 387002 just finished my aquascape on my ea reef pro 900s using Carib sea life rock

That looks great!

Sent from my iPhone using Tapatalk

christiantt · 02/09/2018, 01:23 PM

Quote:

Originally Posted by Ryan20A

Attachment 387002 just finished my aquascape on my ea reef pro 900s using Carib sea life rock

Love the tunnel/bridge!!
Have you used anything to glue it together??

Ryan20A · 02/09/2018, 04:26 PM

Thanks! I used aqua stick epoxy to hold it all together, many people online tend to give epoxy a bad review but I found this stuff great to work with! Though I did use quite a lot of it and at £13 a tube it wasn’t cheap either! This is going to be my first saltwater aquarium after keeping all kinds of freshwater fish for as long as I can remember.

Matt Dean · 03/20/2018, 11:03 PM

My restart aquascape. Just a couple of months old. The left rock will hold an anemone.

Reefme3 · 03/22/2018, 08:58 AM

I began my aquascape last night and I got wrapped up with my work and by the time I ran out of glue I looked at the time and it was 12:30am.

I wanted to finish this up this weekend so I am buying more and having it shipped overnight so I can have it Friday night. I will get a good night sleep tonight and pull another long Friday night.

I would say I am about 70% complete. I believe the left side is complete. I still have about 60lbs of rock on the floor. These are all the smaller pieces to create ridges and bridges. I will start on the right side and work to the middle when the glue arrives.

I had laid the rock work out on a a 8' x 24" stand about a month ago and once I started gluing things in the tank last night I started changing a few things around and create more interesting shapes. The basic pattern and location of the large rock didn't change much but I was able to create more pronounced shapes and caves now that I am gluing things together.

What do you guys think of the work so far. I will post the final pictures next week.

whyamisofly · 03/22/2018, 10:07 AM

Quote:

Originally Posted by Reefme3

I began my aquascape last night and I got wrapped up with my work and by the time I ran out of glue I looked at the time and it was 12:30am.

I wanted to finish this up this weekend so I am buying more and having it shipped overnight so I can have it Friday night. I will get a good night sleep tonight and pull another long Friday night.

I would say I am about 70% complete. I believe the left side is complete. I still have about 60lbs of rock on the floor. These are all the smaller pieces to create ridges and bridges. I will start on the right side and work to the middle when the glue arrives.

I had laid the rock work out on a a 8' x 24" stand about a month ago and once I started gluing things in the tank last night I started changing a few things around and create more interesting shapes. The basic pattern and location of the large rock didn't change much but I was able to create more pronounced shapes and caves now that I am gluing things together.

What do you guys think of the work so far. I will post the final pictures next week.

I think it looks good and personally wouldn't add any more!

jt48 · 03/22/2018, 12:24 PM

Too much as is.. definitely cancel ur order. No offense just common mistake.

slapshot · 03/22/2018, 07:02 PM

Quote:

Originally Posted by Reefme3

I began my aquascape last night and I got wrapped up with my work and by the time I ran out of glue I looked at the time and it was 12:30am.

I wanted to finish this up this weekend so I am buying more and having it shipped overnight so I can have it Friday night. I will get a good night sleep tonight and pull another long Friday night.

I would say I am about 70% complete. I believe the left side is complete. I still have about 60lbs of rock on the floor. These are all the smaller pieces to create ridges and bridges. I will start on the right side and work to the middle when the glue arrives.

I had laid the rock work out on a a 8' x 24" stand about a month ago and once I started gluing things in the tank last night I started changing a few things around and create more interesting shapes. The basic pattern and location of the large rock didn't change much but I was able to create more pronounced shapes and caves now that I am gluing things together.

What do you guys think of the work so far. I will post the final pictures next week.

I would remove the ones connecting the left rock. Push the center together. Watch some YouTubes on the rule of thirds. It needs more open space. I’m not a fan of the wall look. That’s just me, if you like the wall look then it looks great.

Chad_P · 04/12/2018, 10:32 AM

Here’s mine. Just finished trimming out the stand, gonna be hanging lights from the shelf. 180 gallons. Held together with zip ties and fiberglass rods where needed.

Sent from my iPhone using Tapatalk

muppet12345 · 04/12/2018, 10:33 AM

What Do you think?

Gesendet von meinem HTC U11 mit Tapatalk

ABzReef · 04/12/2018, 09:48 PM

How did you drill it al the way thru the rocks?

Quote:

Originally Posted by euromomtx

I am getting ready to set up my 215 gallon tank.
In my last tank (a 125g) I had the typical 'wall of rock' look. Since I love large gorgonians and NPS corals I wanted something different this time.

I am using (old and new) pukani dry rock and nylon thread rods with bolts and washers (all nylon)

The new set up will accommodate a pair of jawfish and have approx 6-7" of DSB. The red coffee can in the pics is about that tall just to give you an idea of what will disappear in the sand

how I envision to plant it with gorgos, sun corals, etc.:

This time around I was looking for a more 3-dimensional look. Here's a picture from the top. The brown paper it sits on is the same footprint as the tank will be:

I took the pictures before I cut off the nylon rod ends. Obviously it's much less noticeable without ends sticking out.

ABzReef · 04/12/2018, 10:10 PM

Quote:

Originally Posted by The_Quick

Now look....

Thanks for all....

What did u use to put the rocks together

Headhunter · 06/21/2018, 01:56 PM

Quote:

Originally Posted by BL

My new aquascape has more open space area, all are natural deathrock.

Fantastic job on this aquascape! Any updated pix with fish/coral?

03/22/2018, 12:24 PM	#1307
jt48 Registered Member Join Date: Mar 2003 Location: Richboro Pa 18954 Posts: 762	Too much as is.. definitely cancel ur order. No offense just common mistake. __________________ My 900 Gallon System Setup. 75% of 344 DT to 125 to 60 refugium to two 40 breeders to 150 sump. 25% of 344 DT to 135 to a 75 to 150 sump. Filtration includes passive filtration pads, skimmer, ca

02/09/2018, 04:26 PM	#1303
Ryan20A Registered Member Join Date: Jan 2018 Location: Scotland Posts: 31	Thanks! I used aqua stick epoxy to hold it all together, many people online tend to give epoxy a bad review but I found this stuff great to work with! Though I did use quite a lot of it and at £13 a tube it wasn’t cheap either! This is going to be my first saltwater aquarium after keeping all kinds of freshwater fish for as long as I can remember.

04/12/2018, 10:32 AM	#1309
Chad_P Registered Member Join Date: Dec 2016 Posts: 150	Here’s mine. Just finished trimming out the stand, gonna be hanging lights from the shelf. 180 gallons. Held together with zip ties and fiberglass rods where needed. Sent from my iPhone using Tapatalk

04/12/2018, 10:33 AM	#1310
muppet12345 Registered Member Join Date: Oct 2009 Location: Germany Posts: 9	What Do you think? Gesendet von meinem HTC U11 mit Tapatalk